Magnetocaloric properties of DyCo2−xGax alloys

The influence of the substitution of Ga atoms for Co atoms in DyCo₂ compounds on magnetocaloric properties has been investigated. A series of DyCo_2−xGa_x alloys with x=0, 0.03, 0.06, 0.1, 0.15, and 0.2 was prepared by the arc-melting method for this investigation. Experimental results revealed that the Ga substitution for Co in DyCo₂ can form a single phase with the cubic Laves phase structure up to x=0.2. As the Ga content x increases, the lattice parameter and the Curie temperature T_c increases from 143 to 196 K linearly. The maximum magnetic entropy changes in a low field change of 0-1.5 T, increasing from 8.24 to 10.61 J/K kg when the Ga content x increases from 0 to 0.03, but decreasing gradually to 3.51 J/K kg as the Ga content further increases to x=0.2. All the samples show a relatively large magnetic entropy change with very small hysteresis loss.     

Photocatalytic performance of nano-ZnTiO3 decorated with Ag/AgCl nanoparticles for degradation of the organic dyes

Research on Chemical Intermediates - Ag/AgCl/ZnTiO3 nanohybrids were assembled by the photoreduction–precipitation assisted with ultrasonic method. Rhodamine B (RhB), methylene blue (MB) and...     

Si-O-C骨架支撑型高循环性能锂离子电池硅基负极材料

通过经济有效的方法制备得到一种具有长循环寿命的高效稳定性硅/硅氧碳/无定形碳的复合负极材料结构. 在这种结构中,以具有稳定化学性能的硅氧碳结构作为骨架,来支撑和隔离硅纳米颗粒结构. 材料中包含的无定形碳组分可提高硅/硅氧碳结构的电导性能. 这种复合负极结构在0.3C电流充放电情况下,不仅能发挥出637.3 mAh·g^-1的比容量,而且在经过100 周的充放电循环后,其容量保持率也达到86%. 这种新型硅基负极材料的设计为其他功能材料的设计提供了一种潜在可能的方法.     

水玻璃砂中碳酸盐含量的测定

将水玻璃砂样品(10~20g)置于测定装置的反应瓶中,并在吸收瓶中预先加入氢氧化钡标准溶液25.00mL,加水至吸收液的总体积为60mL,检查测定装置的气密性。向反应瓶中加入过量硫酸(1+9)溶液使样品中的碳酸盐反应定量释放出二氧化碳气体。反应时间约为0.5min。释出的二氧化碳导入吸收瓶中,与氢氧化钡反应生成碳酸钡沉淀。多余的氢氧化钡用盐酸标准溶液滴定,据此计算样品中碳酸盐的含量。为使吸收充分完全,采用内部强制循环吸收的方法并规定吸收时间至少15min,如样品中碳酸钠含量较高时,可延长吸收时间至20min或30min。试验时,加入标准碳酸钠量为0.104 7g,3次测定的平均值为0.106 5g,相对平均偏差为1.8%。     

Substrate-Induced Dimerization Assembly of Chiral Macrocycle Catalysts toward Cooperative Asymmetric Catalysis

An artificial system of substrate-induced dimerization assembly of chiral macrocycle catalysts enables a highly cooperative hydrogen-bonding activation network for efficient enantioselective transformation. These macrocycles contain two thiourea and two chiral diamine moieties and dimerize with sulfate to form a sandwich-like assembly. The macrocycles then adopt an extended conformation and reciprocally complement the hydrogen-bonding interaction sites. Inspired by the guest-induced dynamic assembly, these macrocycles catalyze the decarboxylative Mannich reaction of cyclic aldimines containing a sulfamate heading group. The imine substrate can be activated toward nucleophilic attack of β-ketoacid by a cooperative hydrogen-bonding network enabled by sulfamate-induced dimerization assembly of the macrocycle catalysts. Highly efficient (>95 % yield in most cases) and enantioselective (up to 97.5:2.5 er) transformation of a variety of substrates using only 5 mol % macrocycle was achieved.     

云蒸霞蔚——多色双喷泉实验

本实验在氨气和氯化氢气体的单喷泉实验基础上设计了集两种气体的制备、收集、验满、尾气处理、气体反应、喷泉实验与试剂回收利用于一体的连续性实验,喷泉部分涉及到的实验原理有氨气与硫酸铜溶液的配位反应、氨气与氯化钴溶液的沉淀反应、无色酚酞溶液和酸性对硝基苯酚溶液在碱性环境下的变色反应,以及氯化铁和硫氰化钾在弱酸性条件下的反应等。本实验的主要仪器装置由团队自行设计、定制,操作简便,玻璃活塞还可控制喷发顺序,实现多色多样喷泉,伴随氯化铵生成时的袅袅白烟,云蒸霞蔚,煞是壮观。另外,我们设计了多角度的互动方案,针对不同程度知识背景的受众传授知识,让参观者真切感受到化学的魅力。     

2-(Diphenylphosphino)benzoate-functionalized diiron ethane-1,2-dithiolate complexes with uncoordinated or coordinated phosphine ligand

Abstract

Treatment of the starting complex [Fe₂(CO)₆{μ-SCH₂CH(CH₂OH)S}] (1) with 2-(diphenylphosphino)benzoic acid in the presence of N,N’-dicyclohexylcarbodiimide and 4-dimethylaminopyridine gave the corresponding ester derivative [Fe₂(CO)₆{μ-SCH₂CH(CH₂O₂CC₆H₄PPh₂-2)S}] (2) in 92% yield. Further treatment of complex 2 with one equivalent of Me₃NO · 2?H₂O as the decarbonylating agent yielded diphenylphosphino-substituted complex [Fe₂(CO)₅{μ-SCH₂CH(CH₂O₂CC₆H₄PPh₂-2)S}] (3) in 79% yield. Both complexes were characterized by elemental analysis, spectroscopy, as well as by X-ray crystallography. Additionally, the electrochemical properties of these complexes were studied by cyclic voltammetry.     

Current research progress of photopolymerized hydrogels in tissue engineering

Owing to the special fo rmation of photopolymerized hydrogels,they can effectively control the formation of hydrogels in space and time.Moreover,the photopolymerized hydrogels have mild formation conditions and biocompatibility;therefore,they can be widely used in tissue engineering.With the development and application of manufacturing technology,photopolymerized hydrogels can be widely used in cell encapsulation,scaffold materials,and other tissue engineering fields through more elaborate manufacturing methods.This review covers the types of photoinitiators,manu facturing technologies for photopolymerized hydrogels as well as the materials used,and a summary of the applications of photopolymerized hydrogels in tissue engineering.